Banner Environmental Health: Preventing pollution, reducing human exposure to environmental hazards, and ensuring safe and clean drinking water.

PRIVATE WELLS

CONSTRUCTING A NEW WELL

Special well drilling restrictions in the Island Lake area

When you construct a private well, your water supply must meet certain requirements. We will work with your licensed well driller to ensure your well is properly constructed. A permit is necessary before construction begins. Your septic designer or well driller will guide you on the type of permit you need.

The following are required before we are able to approve your water supply:

  1. A copy of the water-well construction report (called a well log) from your well driller;
  2. A copy of the pump test (usually performed by your well driller) that proves your well produces at least five gallons of water per minute per residential connection.
  3. A copy of a bacteria test (performed by a state-approved lab) proving there are no bacteria in the well water.
  4. A chemical analysis of your well water, showing the level of iron, manganese, nitrate, chloride, and conductivity (known as the “Kitsap 5”). This test must be conducted by a state-approved lab.
  5. A copy of your private well system design worksheet, usually completed by your well driller.
  6. Depending on the well’s location, we may require that you and your neighbors sign an agreement to abide by covenants that protect the well’s water quality.

REPLACING A WELL

For all well replacements, you need to complete a well site inspection application and obtain formal approval before you start construction. After we approve your well site, we’ll need the following items in order to approve your water supply:

  1. A copy of the water-well construction report (called a well log) from your well driller.
  2. A copy of the pump test that proves your well produces at least five gallons of water per minute per residential connection (usually performed by your well driller).
  3. A copy of a bacteria test proving there are no bacteria in the well water. This test must be conducted by a state-approved lab.
  4. A chemical analysis of your well water, showing the level of iron, manganese, nitrate, chloride, and conductivity (also known as the “Kitsap 5”). This test must be conducted by a state-approved lab.
  5. A copy of your private well system design worksheet, usually completed by your well driller.
  6. Depending on the well’s location, we may require that you and your neighbors sign an agreement to abide by covenants that protect the well’s water quality.


© 2023 KITSAP PUBLIC HEALTH DISTRICT | 345 6TH STREET, SUITE 300 BREMERTON, WA 98337 | 360-728-2235 |    Terms of use & Privacy Policy   |  Staff Login

KPHD Google Analytics Page